Video Live Mode
Note: it is obsolete software

 

The program is intended for correct set-up of the video television standard (including SECAM).
LiveMode works only with display cards ASUS V3x00/TV.
LiveMode hasn’t GUI.

 

Using LiveMode
After start of any program using television input, simply run the LiveMode with correct parameters.

 

LiveMode command line parameters
Parameters not case sensitive. Use space as delimiters.

Display card model
ParameterComments
AUTOMODELAutomatic detection
V3000ASUS V3000/TV
V3400ASUS V3400TNT/TV
V3800ASUS V3800TNT2/TV

 

Video standards
Parameter Comments
AUOTOSCAN Automatic choice
PAL-BGHI PAL BGHI or NTSC M
NTSC-M NTSC M or PAL BGHI
NTSC4.43-50 NTSC4.43 50Hz or PAL4.43 60Hz
PAL4.43-60 PAL4.43 60Hz or NTSC4.43 50Hz
PAL-N PAL N or NTSC4.43 60Hz
NTSC4.43-60 NTSC4.43 60Hz or PAL N
NTSC-N NTSC N or PAL M
PAL-M PAL M or NTSC N
SECAM SECAM or PAL4.43 60Hz

 

Video source modes
Parameter Comments
MODE0 Composite mode 0
MODE1 Composite mode 1
MODE2 Composite mode 2
MODE3 Composite mode 3
COMPOSITE Composite mode 3 (synonym MODE3)
MODE6 S-video mode 6
S-VIDEO S-video mode 6 (synonym MODE6)
MODE7 S-video mode 7
MODE8 S-video mode 8
MODE9 S-video mode 9

 

Luminance and chrominance controls**
Parameter Comments
BRIGHTNESS Luminance brightness control
BRIG Luminance brightness control
CONTRAST Luminance contrast control
CONT Luminance contrast control
SATURATION Chrominance saturation control
SATN Chrominance saturation control
HUE Chrominance hue control
** These commands need parameter - control value (decimal or C-notation hex-value).

 

Miscellaneous commands
Parameter Comments
REG Save value to the SAA7111A(SAA7113H) register ***
DEFAULT Set all registers of the SAA7111A(SAA7113H) to default values
** This command needs two parameters (decimal or C-notation hex-value). First parameter is register address and second parameter is register value.

Remark: SAA7111A(SAA7113H) is Enhanced Video Input Processor in the hardware configuration of the display card.

 

Examples
Correct examples:
"C:\Program Files\VLive\LiveMode\LiveMode.exe" auotoscan
"C:\Program Files\VLive\LiveMode\LiveMode.exe" V3400 Composite SECAM reg 17 0xF0 brig 0xE0

Absurd example:
"C:\Program Files\VLive\LiveMode\LiveMode.exe" V3800 Composite SECAM default

 

ESSENTIAL REQUIREMENT
WDM Video Live IO driver for access to EVIP is needed for correct operation

 

"TV hardware" control download category

 

 

Problems, comments, feedback