MACHINES

The company produces the following goods:

Multipurpose wood-processing machine SDU-250

Multipurpose wood-processing machine SDU-250

Application:

Multipurpose wood-processing machine SDU-250 can be used in small jointer's shops of farmers, collective farms, industrial enterprises, in construction of dwellings, summer cottages and manufacture of various lumber goods.

The machine is designed for the fulfillment of the following operations:

• Longitudinal and lateral cutting of lumber, fiber and wood particle boards;
• Jointing of surfaces;
• Quarter shaping;
• Groove shaping;
• Manufacture of battens and coating rods;
• Drilling of holes;
• Making of grooves;
• Production of joint elements for tenons;
• Manufacture of blanks for window casings and door frames;
• Manufacture of elements for window frames and furniture.

The machine is designed in accordance with category 4 in climatic construction 'UHL', the standard GOST 15150-69.

Technical Specifications:

1. Installed power, kW	1,5 or 2,2
2. Three phase voltage, V                  one phase, V	380 220
3. Electric engine	unsynchronic
4. Spindle rotating frequency, revolutions per minute	2500 or 3400
5. Adjustment of saw overhang, mm	from 0 to 65
6. Dimensions of a blank for sawing:         max width, mm         min length, mm	60 350
7. Dimensions of a blank for jointing:         max width, mm         min thickness, mm         min length, mm	250 10 350
8. Width of sawing material	not limited
9. Adjustment of chip thickness when jointing     and surface gauge treatment, mm	from 0 to 2
10. Maximum width of shaping, mm	100
11. Manual	feed
12. Overall dimension, mm	830 х 870 х 910
13. Mass, kg	not more than 200

Drill Bench NS-12-M

Drill Bench NS-12-M

Application:

This drill bench is designed for drilling of holes with diameter under 12 mm in products made of ferrous, non-ferrous metal and of non-metal materials. It can be used both in industry and in private locksmith and jointer workshops.

Technical specifications:

1. Maximum diameter of drilling, mm	12
2. Maximum travel of the spindle, mm	100+5
3. Spindle flight from the column, mm	200
4. Max distance from spindle end to table working surface, mm	300
5. Spindle rotational speed	2880, 1500, 800
6. Electric motor capacity, kW	0,37
7. Feed	manual
8. Spindle end cone according to GOST 9953-82	B18
9. Power requirements -      three-phase, V                                       single-phase, V	380 220
10. Period of switching on, %	25
11. Width of table working surface, mm	300
12. Overall dimensions of the product, mm             length                                                  width                                                  height	810 450 910
13. Mass, kg not more than	140

STD-250-25 Double-sided grinding machine

Two-sided grinder (2 grinding wheels) STD-250-25

Application

STD-250-25 double-sided grinding machine is designed for dry grinding of cutting and bench tools, such as: cutters, drills, chisels; for first sharpening of scrapers; redundant metal removal and small surfaces trimming.

Technical specifications:

1. Rotational speed of griding head spindle rpm (nominal)	1500
2. Distance between grinding wheel axles, mm	415
3. Height of grinding wheels centers, mm	905
4. Grinding wheel dimensions, mm	250 х 32 х 25
5. Electric motor capacity, kW, not less than	1,5
6. Voltage, V	380 or 220
7. Support surface dimensions, mm	100х45
8. Period of switching on, %	25
9. Overall dimensions, mm               length                                                  width                                                  height	660 600 1170
10. Mass of the grinder, kg, not more than	130